REDRAGON KUMARA PRO BLUE SW Wireless RGB Mechanical Gaming Keyboard K552P-KBS

REDRAGON KUMARA Pro K552P-KBS RGB Bluetooth & wireless 2.4G 3 mode 87 Keys Mechanical Gaming Keyboard

3-Mode Connection: Here comes Redragon’s innovative 1st-Gen 3-mode connection technology, USB-C wired, BT 3.0/5.0 & 2.4Ghz wireless modes which advanced your use experience to the next level in all fields.

Worry-Free Wireless: Built-in upgraded 3.0/5.0 BT and 2.4Ghz wireless chips, offers a real-wireless and no-latency connection for all devices in the market. Easy to toggle among different wireless devices set no limits of possibility.

How to connect the keyboard to a computer Wired Connection
1. Slide the 2.4G/OFF/BT switch on the bottom of the keyboard to OFF.
2. Take out the USB A to USB Type C cable in the package and connect the keyboard to your computer.
3. The computer will recognize and configure the keyboard automatically
4. The keyboard will be ready for use when the configuration is finished
5. Once the keyboard is powered up, charging begins. The LED marked with M light flashes in white and then turn to red. It will turn to white when the keyboard is fully recharged

2. 4G Wireless Connection
1. Slide the 2 4G/OFF/BT switch on the bottom of the keyboard to 2.4G
2. Take out the nano USB receiver and plug it into an available USB port on your computer. The computer will recognize and configure the keyboard automatically
3. The keyboard will be ready for use when the configuration is finished
4. In some cases, you may need to pair the keyboard. Turn on the keyboard and press [FN]+[2.4G) for about 3 seconds. the LED marked with M flashes in green, plug the USB receiver into any available USB port on your computer within 20 seconds. The keyboard will be paired automatically, Make sure the keyboard has enough power before doing so
5. The indicator will flash when the battery is low. Please recharge the keyboard in time or it will turn off automatically soon

BT Connection
1. Slide the 2. 4G/OFF/BT switch on the bottom of the keyboard to BT
2. Press [FN+[BT1(or [BT21/(BT3) for other BT devices), and the LED marked with M flashes in blue (or cyan/magenta for the others)
3. Turn on BT and scan for available devices on your computer or smartphone. It will find”BT30KB or BT50 KB”device. Select it and it will connect automatically.

Function Introduction
1. With standard USB and 2. 4G/BT connections, the keyboard can be used on computers without any software or driver installation
2. There are 20 backlight effects: FN+”INS” key

How to set the backlighting
Press FN+Backspace to get the start setting, AWSD keys default in green color in the moment, Press FN+Backspace again, and CapsLK is flash in Red at the moment, press desired key for color setting, and the single key color is Red/green/blue/yellow/purple/Cyan/white/OFF by each click, fix the color you want, press FN+ Backspace again to save the setting, press FN+Backspace to quit the setting mode.

OS support
Windows XP/Vista/Win7/Win8/win10