TP-Link DS1016G Omada16-Port Gigabit Unmanaged Rackmount Switch
2.900,00 EGP
DS1016G Omada 16-Port Gigabit Unmanaged Rackmount Switch
- 16× 10/100/1000Mbps RJ45 ports
- Innovative energy-efficient technology saves power consumption
- Supports MAC address self-learning and auto MDI/MDIX
- Standard 19-inch rack-mountable steel case
- Isolation Mode allows one-click client traffic separation for higher security and performance
- Monitor and address loop-related issues within your network structure to prevent disruptions caused by looping
- Plug and Play. No configuration or central management required.*
In stock
What This Product Does
The DS1016G Gigabit Ethernet Switch provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network. All 16 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the DS1016G can save power consumption, making it an eco-friendly solution for your business network.
*Omada Unmanaged Switches do not support Omada SDN central management.
TP-Link Green Technology
This new generation DS1016G Gigabit Switch features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with the EU’s RoHS, prohibiting the use of certain hazardous materials. Besides, most packaging material can be recycled.
High Performance
Easy to Use
The auto features of this gigabit switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance.
Loop Prevention
Monitor and address loop-related issues within your network structure to prevent disruptions caused by looping.
The unmanaged switch is only used to extend the Ethernet ports in the network, allowing more devices to access the network simultaneously. The uplink device like a router or a switch can be connected to any ports on the switch, and the end-clients like computers can be connected to other ports, then the setup is done.
The unmanaged switch is a plug-and-play device which does not require any configuration. It cannot be managed and does not have management interface or IP address.
HARDWARE FEATURES | |
Standards and Protocols | IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab , IEEE 802.3x, IEEE 802.1p |
Interface | 16× 10/100/1000Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX) |
Network Media | • 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) • 100BASE-TX/1000BASE-T: UTP category 5, 5e or above cable (maximum 100m) |
Fan Quantity | Fanless |
Physical Security Lock | Yes |
Power Supply | 100-240VAC, 50/60Hz |
Dimensions ( W x D x H ) | 17.3 × 5.5 × 1.7 in (440 × 140 × 44 mm) |
Mounting | Rack Mountable |
Max Power Consumption | 10.68 W (220 V / 50 Hz) |
Max Heat Dissipation | 36.31 BTU/h |
PERFORMANCE | |
Switching Capacity | 32Gbps |
Packet Forwarding Rate | 23.8Mpps |
MAC Address Table | 8K |
Jumbo Frame | 10KB |
SOFTWARE FEATURES | |
Advanced Features | • Isolation Mode: Ports 1-14 • Loop Prevention: Ports 1-16 • 802.1P/DSCP QoS • Green Ethernet technology |
Transfer Method | Store and Forward |
OTHERS | |
Certification | FCC, CE, RoHS |
Package Contents | • DS1016G • Power Cord • Installation Guide • Rackmount Kits • Rubber Feet |
Environment | • Operating Temperature: 0℃~40℃ (32℉~104℉); • Storage Temperature: -40℃~70℃ (-40℉~158℉); • Operating Humidity: 10%~90% non-condensing; • Storage Humidity: 5%~90% non-condensing |
Be the first to review “TP-Link DS1016G Omada16-Port Gigabit Unmanaged Rackmount Switch” Cancel reply
You must be logged in to post a review.
Reviews
There are no reviews yet.